Send dump memory packets to dump out the DPU's loadable code. Compare the memory dump report tm packets with the memory load packets. Reload full code if a difference is found (see Section 10.0.2).
| Description | tc | tm | params | VxWorks |
| Description | tc | tm | params | VxWorks |
| coninued on next page | ||||
| Switch to the DPU loadable code | h7202 | tc_load_dpuos | ||
| Wait up to 20s for DA_DPUOS_READY | 92202 | Expect ``Jim from the Rim'' | ||
| Enable red dsp | h7207 | h522=``Red'' h16=``Enabled'' | tc_enbl_dsp red,1 | |
| Wait 10s | ||||
| Enable blue1 dsp | h7207 | h522=``Blue1'' h16=``Enabled'' | tc_enbl_dsp blue1,1 | |
| Wait 10s | ||||
| Enable blue2 dsp | h7207 | h522=``Blue2'' h16=``Enabled'' | tc_enbl_dsp blue2,1 | |
| Wait 10s | ||||
| Select blue2 as the klingon | h7206 | h523=``blue1'' | tc_sel_klingon 1 | |
| Perform clock synchronization | h7214 | h600=20 | tc_synch_clk 20 | |
| Wait 3s | ||||
| Initialize DPU | h7248 | tc_init_dpu | ||
| Wait up to 25s for event | 92210 | tm_wait_for_alert DA_EOT_INIT_DPU (``Dave from the Grave'') | ||