.. _fluxcal_verification_955: ###################################################################### Verification of the flux calibration in the visual grism: clocked mode ###################################################################### Overview ======== The new v-grism flux calibration is valid over the whole detector, and makes also a correction for coincidence-loss. The first integrated software version is ``UVOTPY-0.9.7.3``. With the choice of data, we have an independent set from the spectra used to construct the effective area. Of course, spectra from the same targets are used. Method ====== Calibration spectra that were not used in the flux calibration are reprocessed using the new flux calibration and then compared to the known stellar flux. The spectra for verification are located on the detector between the areas with the spectra used to determine the effective areas for the flux calibration. .. figure:: _figures/EA_regions_955.png :width: 640px :align: left :height: 480px The anchor positions of the calibration spectra marked by target. The boxes are enclosing sources used to derive an effective area for the location of the box. Data used for verification ========================== The approximate location of the anchor of the spectra, their ``obsid``, and number of the ``fits extension`` is listed. First the cool stars are listed, followed by the hot white dwarfs. **GSPC P177D spectra (F0 V)** ========= =========== ======= ===== ================== ========== anchor ``obsid`` ``ext`` % err plot aspect correction ========= =========== ======= ===== ================== ========== 1281, 914 00056760001 1 10 :ref:`P177D_Fig31` yes ========= =========== ======= ===== ================== ========== **BPM16274 spectra (DA White Dwarf)** ========= =========== ======= ===== ==================== ========== anchor ``obsid`` ``ext`` % err plot aspect correction ========= =========== ======= ===== ==================== ========== 1095,1470 00054003006 1 10 :ref:`BPM16274_Fig1` None 1570, 869 00054004004 1 15 :ref:`BPM16274_Fig2` None ========= =========== ======= ===== ==================== ========== **LTT9491 spectra (DB3 White Dwarf)** ========= =========== ======= ===== =================== ========== anchor ``obsid`` ``ext`` % err plot aspect correction ========= =========== ======= ===== =================== ========== 597, 628 00056202005 1 50 :ref:`LTT9491_Fig1` yes 885,1408 00056201003 1 25 :ref:`LTT9491_Fig2` yes 1485,1326 00056202003 1 20 :ref:`LTT9491_Fig3` yes ========= =========== ======= ===== =================== ========== **GD50 spectra (DA2 white Dwarf)** ========= =========== ======= ===== ================ ========== anchor ``obsid`` ``ext`` % err plot aspect correction ========= =========== ======= ===== ================ ========== 562, 665 00054300019 1,2 18 :ref:`GD50_Fig1` None 750,1150 00054303003 1 15 :ref:`GD50_Fig2` yes ========= =========== ======= ===== ================ ========== **GD108 spectra (sdB)** ========= =========== ======= ===== ================= ========== anchor ``obsid`` ``ext`` % err plot aspect correction ========= =========== ======= ===== ================= ========== 1150,1400 00055051008 1 10 :ref:`GD108_Fig1` yes ========= =========== ======= ===== ================= ========== Result of the verification ========================== The errors are typically 20% or less. The response below 2900A shows some inconsistencies which is partly due to the low sensitivity, partly to the coincidence-loss correction. One spectrum of LTT9491 is located with anchor at [597,628], far from the calibrated region and the effective area has been extrapolated. A future update to the calibration based on extra coverage of the detector region where the response drops off steeply is needed to refine this. All other spectra are located in the calibrated region.