/* Real-time sequence execution */

START:2006/10/03.23:50:00 {
   SEQ:EIS_USC_Y_SEQ ;
}

/*------------------------------------------*/
/* Real sequences */

DEFSEQ(REAL) : EIS_USC_Y_SEQ{
    C. : "EIS Start-up 2-c (COMENG002)" ;
    CMD : EIS_MHC_MK_HTR_OFF ;
    C. : "Wait 5 sec " ;
    CMD : EIS_MHC_E28V_ON ;
    C. : "Wait 5 sec " ;
    CMD : EIS_MHC_M28V_ON ;
    C. : "Wait 5 sec " ;
    CMD : EIS_MHC_OPE_HTR_ON ;
    C. : "Wait 5 sec " ;
    CMD : EIS_LOAD_MHC_SOFT7 ;
    C. : "Wait for 3 min " ;
    CMD : EIS_MHC_MODE_RAM ;
    C. : "Wait for 15 sec " ;
    CMD : EIS_MHC_ABORT ;
    C. : "Wait for 20 sec " ;
    CMD : EIS_CLR_ICU_ERR ;
    C. : "Wait for 5 sec (then turn off Clamshell encoders) " ;
    CMD : EIS_UPLOAD_MHCPAR 69 C3 FF FF;
    C. : "Wait for 10 sec " ;
    CMD : EIS_DUMP_MHCPAR 02 00 00 00 CC ;
    C. : "Wait for 10 sec " ;
    CMD : EIS_MHC_WATDOG_ENA ;
    C. : "Wait for 5 sec " ;
    CMD : EIS_MHC_SAFE_ENA ;
    C. : "Wait for 5 sec " ;

    /* Not used post launch*/
    /*       CMD : EIS_VAC_GAUGE_ON ; */
    /*       C. : "Wait for 5 sec " ;            */

}

/*------------------------------------------*/
/* OP sequences */
 
/*------------------------------------------*/
/* OG sequences */