$sequence_number = 23;
#This sequence performs 49 prescan pixels read + 50 from the other side
sequence_id(0xface)
sequence_repeats(1)

#0x0A LEFT RO enable
eis_cam_setup_ae(0x99,0x99,0x77,0x2f,0xa,0,0,0)

# Program CAM Y-start and Y-height
eis_cam_prog_csg_win(0x04,0x0,0x0c,0x80)
eis_cam_prog_csg_win(0x84,0x0,0x0c,0x01)
eis_cam_prog_csg_win(0x04,0x0,0x14,0x91)
eis_cam_prog_csg_win(0x84,0x0,0x14,0x00)

# program x_start and x_length
eis_cam_prog_csg_win(0x04,0x0,0x2D,0x80)
eis_cam_prog_csg_win(0x84,0x0,0x2D,0x01)
#862 = 2148 - 1 (discard pixel) - 1 (the usual -1)
eis_cam_prog_csg_win(0x04,0x1,0x07,0x88)
eis_cam_prog_csg_win(0x84,0x1,0x07,0x62)

# program side L read-out
eis_cam_prog_csg_win(0x04,0x0,0x00,0x09)
eis_cam_prog_csg_win(0x84,0x0,0x00,0x66)
eis_cam_prog_csg_win(0x04,0x0,0x01,0x12)
eis_cam_prog_csg_win(0x84,0x0,0x01,0xB3)

# sci_ops goes here
xrt_flare_trigger = disable
eis_aec           = disable
eis_event_trigger = disable
eis_flare_trigger = disable

eis_sci_op(xrt_flare_trigger, eis_aec, eis_event_trigger, eis_flare_trigger)

id		= 0xBEEF
mip             = 0
loop_cntr       = 1
data_comp       = 0
ocb_x           = 1
ocb_y           = 1
flush_seq_id    = 2
num_flush       = 5
exp_per_ras_pos = 1
asrc_ctl        = 0x00
ro_node         = 0xA
ras_repeats     = 1
asrc_skip       = 0
ro_seq_id       = 4
mirror_step     = 0
line_list       = 23
#sci_op is implicitly handled by run_raster. No need to include as parameter

eis_run_raster(id, mip, loop_cntr, data_comp, ocb_x, ocb_y, flush_seq_id, num_flush, exp_per_ras_pos, asrc_ctl, ro_node, ras_repeats, asrc_skip, ro_seq_id, mirror_step, line_list)

here:

exp_time_10ms = 15 * 100


eis_start_exp(exp_time_10ms)

eis_set_seq_loop("here")

eis_stop_seq(23)