EIS Master Study Database

The scripts for the post-eclipse heater settings.

default_htrs1_6.seq

# This sequence configure the MHC following first MAN. mode entry

$sequence_number = 05;

# Sequence id doesn't matter as planning tool
# will re-assign it
sequence_id(0x0000)
sequence_repeats(1)

#Turn all MHC heaters OFF. 1 TO TURN HEATERS OFF
eis_mhc_heater_off(0xffff)
eis_delay(1000)

#Set heaters 1 to 6 duty cycle
 
eis_mhc_parameter_set(0x212e,0x2492)
eis_mhc_parameter_set(0xc9af,0x36db)
eis_mhc_parameter_set(0xa930,0x2492)
eis_delay(1000)
eis_mhc_parameter_set(0x41b1,0x36db)
eis_mhc_parameter_set(0x81b2,0x1249)
eis_mhc_parameter_set(0x6933,0x2492)
eis_delay(1000)

eis_stop_seq(05)
    

default_htrs7_12.seq

# This sequence configures the MHC heaters following first MAN. mode entry

$sequence_number = 06;

sequence_id(0x0000)
sequence_repeats(1)

#Set heaters 7 to 12 duty cycle

eis_mhc_parameter_set(0xe1b4,0x1249)
eis_mhc_parameter_set(0x0935,0x1b6d)
eis_mhc_parameter_set(0xc936,0x924)
eis_delay(1000)
eis_mhc_parameter_set(0x21b7,0x924)
eis_mhc_parameter_set(0x21b8,0x2492)
eis_mhc_parameter_set(0xc939,0)
eis_delay(1000)

#Set heaters cycle time (1000*100ms = 100 seconds)
eis_mhc_parameter_set(0x093a,1000)

#Turn all MHC heaters ON
eis_mhc_heater_on(0x0fff)
eis_delay(1000)

eis_stop_seq(06)