Engineering Mode 0: Raw Data of Both DSPs

Description	tc	tm	params	VxWorks
Description	tc	tm	params	VxWorks
coninued on next page
Change to ICU mode 4 (``engineering mode'')	h9004			tc_mode 4
Set frame time to 10000ms	h7236		h710=10000	tc_set_frame_time 10000
Set exposure id	h7238		h530= exposure_id	tc_set_exp_no exposure_number
Send IC_INIT_EXP	h7249			tc_send_command IC_INIT_EXP
Wait 5s
Load window table	h7110		Table 31	det_reset_wind ; det_wind 0, 0, 255, 255
Load windows	h5110			tc_det_load_windows 1
Wait up to 60s for event		92100	h7000=``win tab load''
Ensure frame tags are enabled	h7135		h16=``enabled''	tc_det_enbl_frame_tag 1
Prepare BPE for image acquisition	h7131		h120=threshold	tc_det_event_threshold threshold
Set acquisition mode	h7130		h110=``hi res win''	tc_det_acq_mode 3
Start sending events from mic	h5130			tc_det_start_int
Choose engineering mode 0	h7254		h880=``Raw + 2 blue''	tc_enbl_eng 1, 0
Wait up to 12s for end of exposure		92205		tm_wait_for_alert DA_ENDOF_EXP
Wait up to frame_time + ??s for end of exposure		92209		tm_wait_for_alert DA_COMPLETE_EXP
Wait up to ??s for telemetry to finish

 

 

Table 31: Window Table

Description	PREF
Verification	h10
Number of windows	h40
Window 1 Xlow	h50
Window 1 Ylow	h51
Window 1 Xsize	h52
Window 1 Ysize	h53
Window 2 Xlow	h54
Window 2 Ylow	h55
Window 2 Xsize	h56
Window 2 Ysize	h57
.	.
.	.
.	.
Window 14 Xlow	h102
Window 14 Ylow	h103
Window 14 Xsize	h104
Window 14 Ysize	h105
Window 15 Xlow	h106
Window 15 Ylow	h107
Window 15 Xsize	h108
Window 15 Ysize	h109